HomeAbout UsNewsSales TeamBrochuresContact UsSearch
ANIMAL & PLANT MANAGEMENT
FEED CONSERVATION
HORTICULTURE
ROPE & CORDAGE

Total Solution Components

Donaghys provide our Australian customers with a survey form with the requirements of any hauling job.  Once you have set the parameters, we can provide you with all the available "Best Fit" options for the job at hand.

We can splice, add termination fittings and custom pack to your requirements.   Whether you require a 5 Tonne or 500 Tonne Hauling System, Donaghys Answer Your Haul! 

Soft Eye Splice Applications
  • Cable hauling winch lines where the rope bulk is restricted by the diameter of the Conduit
  • For fitting of clips and rings direct to rope
  • Hand holds
  back to top
Foundry Hook

This fitting is usually used in conjunction with a steel captive thimble in dragline applications (mining and heavy industry).

  back to top
Winch line on a Timber Cable Drum
  • Winch line delivered to a customer in this form, allows for easy rewinding  onto their winch drum
  • Also protects line against damage during transport
  back to top
End Whipping

It is important that a whipping be put on any bare end of rope in order to prevent the unlaying and fraying of the strands.

  back to top
Thimble Eye Splice
  • Standard thimle eye (with open V) available in galvanised steel, stainless steel or nylon
  • Strengthens and protects spliced eye against abrasion
  • Light applications e.g. anchor ropes
  back to top
Gusseted Tubed Thimble
  • Heavy duty applications (similar to the captive thimble)
  • The gusset prevents the expansion or distortion of thimble under extreme load, but reduces the size (dia) of connecting fitting that can be used
  back to top
Captive Thimble Eye
  • Captive thimble eye with welded "V"
  • Heavy duty applications
  • Recommended for use with synthetic ropes to prevent the rope from jumping out of the thimbles under extreme tension
  • Allows unrestricted use of heavier connecting fittings e.g. shackles and rings
  back to top
Extra Heavy Duty Towing Strop
  • Completed 80mm x 3m
  • Manufactured from Ocean 12 Dyneema SK75 Urethane coated (tensile strength 419.4 Tons)
  • Fitted with a 96mm marine grade cast steel galvanised captive thimble each end
  • The body of the strop is covered with a rubber tube for added protection to reduce abrasion and prevent penetration of debris into the rope fibres
  back to top